11
B. Viewing and Operating Multiple Remote Sensors
To view the temperature of a different remote sensor unit, press
and release the
“CH”
button. An arrow over one of the numbers
at the bottom of the LCD will be seen.
To view the minimum/maximum temperature:
1. Press and release the
“CH”
button to select which remote
temperature sensor to read data from (indicated by the
arrow).
2. Press and release the
“MIN/MAX/RESET”
button.
3. The maximum recorded temperature will be displayed.
4. Press and release the
“MIN/MAX/RESET”
button (while
“MIN” is still displayed, otherwise press the button
twice).
5. The minimum recorded temperature will be displayed.
To reset the minimum/maximum readings
1. Select which remote sensor you wish to reset by pressing
the
“CH”
button.
2. Press and hold the
“MIN/MAX/RESET”
button for 3
seconds.
3. The records for the selected remote sensor unit will be
reset.
Note:
The minimum and maximum indoor temperature values
will be reset when any of the remote temperature values
are reset.
