17
V. Alarm Function
A. Setting the Alarm (Alarms 1 and 2)
Note:
There are two alarms that can be set. Each alarm will
sound for a complete duration of 2 minutes.
1. Press and hold the
“AL1”
button for 5 seconds or until
the alarm-time display flashes in the DATE LCD.
2. Press and release the
“IN”
button to set the alarm hours.
3. Press and release the
“OUT”
button to set the alarm
minutes.
4. Press and release the
“AL1”
button or wait 15 seconds for
the unit to automatically confirm the alarm time and
return to display the date in the DATE LCD as normal.
5. The ((1)) icon, appearing in the DATE LCD, indicates
that the alarm is set to sound at the programmed time.
Note:
Programming the alarm time automatically activates
the alarm to sound at the programmed time.
6. To deactivate the alarm, press and release the
“AL1”
button (removing the ((1)) icon from the screen).
7. To reactivate the alarm press and release the
“AL1”
button.
8. After each activation or deactivation the programmed
alarm time is displayed. Wait 15 seconds and the date
will display in the DATE LCD again.
9. To set, activate, and deactivate alarm 2, follow the
directions above for alarm 1—using the
“AL2”
button in
place of the
“AL1”
button. The ((2)) icon will represent
activation and deactivation of Alarm 2.
