background image

 

24

sensor): 
Outdoor temperature reception 
(indoor weather station): 

Every 5 minutes. 

Transmission range: 

80 feet (in open space). 

Power Supply: 

Indoor weather station: 

2 x AA, IEC LR6, 1.5V. 

Remote temperature sensor: 

2 x AA, IEC LR3, 1.5V. 

Battery life cycle: 

Approximately 12 months. 

Recommended battery type: 

Alkaline. 

 

 

Dimensions (H x W x D) 

Indoor weather station (without 
stand): 

3.875“ x 3.875“ x 1.25“ 
(98 x 98 x 32 mm). 

Remote temperature sensor: 

5.04“ x 1.57“ x 0.9“  
 (128 x 40 x 23 mm) 

 
 
 

WARRANTY INFORMATION 

La Crosse Technology, Ltd provides a 1-year limited warranty on this product against 
manufacturing defects in materials and workmanship. 
 
This limited warranty begins on the original date of purchase, is valid only on products 
purchased and used in North America and only to the original purchaser of this 
product.  To receive warranty service, the purchaser must contact La Crosse 
Technology, Ltd for problem determination and service procedures.  Warranty service 
can only be performed by a La Crosse Technology, Ltd authorized service center.  
The original dated bill of sale must be presented upon request as proof of purchase to 
La Crosse Technology, Ltd or La Crosse Technology, Ltd’s authorized service center. 
 
La Crosse Technology, Ltd will repair or replace this product, at our option and at no 
charge as stipulated herein, with new or reconditioned parts or products if found to be 
defective during the limited warranty period specified above.  All replaced parts and 
products become the property of La Crosse Technology, Ltd and must be returned to 
La Crosse Technology, Ltd.  Replacement parts and products assume the remaining 
original warranty, or ninety (90) days, whichever is longer.  La Crosse Technology, Ltd 
will pay all expenses for labor and materials for all repairs covered by this warranty.  If 
necessary repairs are not covered by this warranty, or if a product is examined which 
is not in need or repair, you will be charged for the repairs or examination.  The owner 
must pay any shipping charges incurred in getting your La Crosse Technology, Ltd 
product to a La Crosse Technology, Ltd authorized service center.  La Crosse 

Summary of Contents for WS-7168U



























Reviews: