13
11. Press and release the
“SET”
button to confirm the
year and to advance to
°
F and
°
C selection (skip step
1 and 2 in section VI if continuing).
VI. Selecting
°
F OR
°
C
1. Press and hold the
“SET”
button for 2 seconds or
until “12h” or “24h” flashes.
2. Press and release the
“SET”
button 9 times to reach
the
°
F or
°
C setting mode.
3. “
°
F” is the default setting and the temperatures
(inside and remote) will be flashing.
4. Press and release the
“+”
button to select
°
F to
°
C.
5. Press
the
“SET”
button to confirm and to advance to
the LCD setting (skip step 1 and 2 of section VII if
continuing).
VII. Setting the LCD Contrast
1. Press and hold the
“SET”
button for 2 seconds, or
until “12h” flashes.
2. Press and release the
“SET”
key 10 times to reach
the LCD contrast setting mode.
3. There are 8 LCD contrast levels to choose from—
“Lcd 0” is the lightest, and “Lcd 7” is the darkest.
“Lcd 5” is the default setting.
4. Press and release the
“+”
button to toggle through
the settings.
5. Press and release the
“SET”
button to confirm and
exit the programming mode.
