background image

• 

Within ferro-concrete rooms (basements, superstructures), the received signal is naturally 
weakened. In extreme cases, please place the unit close to a window and/ or point its front or 
back towards the Fort Collins, Colorado, transmitter. 

• 

During nighttime, the atmospheric disturbances are usually less severe and reception is 
possible in most cases. A single daily reception is adequate to keep the accuracy deviation 
below 1 second. 

 

Note:  

In case the atomic clock is not able to detect the WWVB-signal (disturbances, transmitting 
distance, etc.), the time can be manually set (please refer to notes on 

Manual time setting

). 

 

WEATHER FORECAST

 

The weather forecasting feature is estimated to be 75% accurate. The weather forecast is based 
solely upon the change of air pressure over time. The WS-8256U averages past air-pressure 
readings to provide an accurate forecast, creating a necessity to disregard all weather forecasting 
for 12-24 hours after the unit has been set-up, reset, or moved from one altitude to another (i.e. 
from one floor of a building to another floor).  In areas where the weather is not affected by the 
change of air pressure, this feature will be less accurate. 

 

Weather Icons 

There are 3 possible weather icons that will be displayed in the LCD 2:   

 

Sunny

—indicates that the weather is expected to improve (not that the weather will be sunny). 

Sun with Clouds

—indicates that the weather is expected to be fair (not that the weather will be 

sunny with clouds). 

Clouds with Rain

—indicates that the weather is expected to get worse (not that the weather will 

be rainy). 

 

The weather icons change when the unit detects a change in air pressure. The icons change in 
order, from “sunny” to “partly sunny” to “cloudy” or the reverse. It will not change from “sunny” 
directly to “rainy”, although it is possible for the change to occur quickly. If the symbols do not 
change then the weather has not changed, or the change has been slow and gradual.  

 

13

Summary of Contents for WS-8256-AL





















Reviews: