background image

3. 

Press and release the 

SET

 key to confirm the Year setting and continue to the Month 

setting. 

 

MONTH SETTING 

1. 

The month digits on LCD2 will start flashing. 

2. 

Press and release the 

+

 key to select the desired month. 

3. 

Press and release the 

SET

 key to confirm the Month setting and continue to the Date 

setting. 

 

DATE SETTING 

1. 

The digits for the date will start flashing in the lower LCD (Default setting 1). 

2. 

Press and release the 

+

 key to select the desired date. 

3. 

Press and release the 

SET

 key to confirm the Date setting and exit the manual setting 

mode. 

Note: 

The date can only be set in conjunction with the selected month. For example, it is not 

possible to set the date 30 if the month of February is selected. 

 

EXIT THE MANUAL SETTING MODES 

• 

To return to the normal display mode from anywhere in manual setting mode simply press 
the 

ALM 

key at anytime. 

• 

If no keys are pressed for at least 15 seconds in setting mode, the atomic clock will 
automatically switch back to normal display mode.

 

 

ALARM SETTING 

To enter into the alarm setting mode: 
1. Hold 

the 

ALM

 key for 5 seconds. The hour digits start flashing. 

2. 

Press and release the + key to set the hour. 

3. 

Press and release the 

ALM

 key to continue to the minutessetting. 

4. 

The minute digits start flashing. 

5. 

Press and release the + key to set the minutes. 

6. 

Press and release the 

ALM

 key to exit the Alarm setting mode or wait for 15 seconds for the 

clock to automatically timeout and return to the standard display mode. 

 
 
 

 

 

 

9

Summary of Contents for WS-8256-AL





















Reviews: