background image

21

 

 

 

WARRANTY INFORMATION 

 
La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. 
 
This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the 
original purchaser of this product.  To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem 
determination and service procedures.  Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center.  
The original dated bill of sale must be presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse Technology, 
Ltd’s authorized service center. 
 
La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned 
parts or products if found to be defective during the limited warranty period specified above.  All replaced parts and products become the 
property of La Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd.  Replacement parts and products assume the 
remaining original warranty, or ninety (90) days, whichever is longer.  La Crosse Technology, Ltd will pay all expenses for labor and materials 
for all repairs covered by this warranty.  If necessary repairs are not covered by this warranty, or if a product is examined which is not in need or 
repair, you will be charged for the repairs or examination.  The owner must pay any shipping charges incurred in getting your La Crosse 
Technology, Ltd product to a La Crosse Technology, Ltd authorized service center.  La Crosse Technology, Ltd will pay reasonable return 
shipping charges to the owner of the product. 
 
Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship with the following specified exceptions: (1) damage 
caused by accident, unreasonable use or neglect (including the lack of reasonable and necessary maintenance); (2) damage occurring during 
shipment (claims must be presented to the carrier); (3) damage to, or deterioration of, any accessory or decorative surface; (4) damage 
resulting from failure to follow instructions contained in your owner’s manual; (5) damage resulting from the performance of repairs or 
alterations by someone other than an authorized La Crosse Technology, Ltd authorized service center; (6) units used for other than home use 
(7) applications and uses that this product was not intended or (8) the products inability to receive a signal due to any source of interference..  
This warranty covers only actual defects within the product itself, and does not cover the cost of installation or removal from a fixed installation, 
normal set-up or adjustments, claims based on misrepresentation by the seller or performance variations resulting from installation-related 
circumstances. 
 
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR 
DAMAGES ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF THIS PRODUCT.  THIS PRODUCT IS NOT TO BE USED FOR 
MEDICAL PURPOSES OR FOR PUBLIC INFORMATION.  THIS PRODUCT IS NOT A TOY.  KEEP OUT OF CHILDREN’S REACH. 
 
This warranty gives you specific legal rights.  You may also have other rights specific to your State.  Some States do no allow the exclusion of 
consequential or incidental damages therefore the above exclusion of limitation may not apply to you. 
 
For warranty work, technical support, or information contact: 
 

La Crosse Technology, Ltd 

190 Main Street 

La Crescent, MN 55947 

Phone: 507.895.7095 

Fax: 507.895.2820 

 

e-mail: 

support@lacrossetechnology.com 

(warranty work) 

 

sales@lacrossetechnology.com 

(information on other products) 

 

web: 

www.lacrossetechnology.com  

 
FCC DISCLAIMER 
 
This device complies with part 15 of the FCC rules.  Operation is subject to the following two conditions: 

(1)  This device may not cause harmful interference. 
(2)  This device must accept any interference received, including interference that may cause undesired operation. 

 

FCC ID: OMO-01RX (Receiver), OMO-01TX (transmitter) 

 

Freq. 433.92 MHz 

La Crosse Technology 

Made in China 

WS-8610 

 
All rights reserved.  This handbook must not be reproduced in any form, even in excerpts, or duplicated or processed using electronic, 
mechanical or chemical procedures without written permission of the publisher. 
 
This handbook may contain mistakes and printing errors.  The information in this handbook is regularly checked and corrections made in the 
next issue.  We accept no liability for technical mistakes or printing errors, or their consequences. 
All trademarks and patents are acknowledged. 

Summary of Contents for WS-8610U






















Reviews: