8
IX.
SETTING THE YEAR, DAY AND MONTH
Note:
Reception of the WWVB signal will also set the date and day. The reception of the signal will override any
programmed date and day.
1.
Press and hold the
SET
button for 5 seconds.
2.
“LCD” will show in the TIME LCD and the number setting will flash.
3.
Press and release the
SET
button seven times.
4.
The year will flash in the DATE LCD.
5.
Press and release the
ALM/+
button to advance the year.
6.
Press and release the
SET
button to confirm the year and advance to the
month setting.
7.
The month will flash in the DATE LCD.
8.
Press and release the
ALM/+
button to advance the month.
9.
Press and release the
SET
button to confirm the month and advance to the
day setting.
10.
The day of the month will flash in the DATE LCD.
11.
Press and release the
ALM/+
button to advance the day of the month.
12.
Press and release the
SET
button to confirm and advance to the snooze
setting.
X.
SETTING THE SNOOZE
1.
Press and hold the
SET
button for 5 seconds.
2.
“LCD” will show in the TIME LCD and the number setting will flash.
3.
Press and release the
SET
button ten times.
4.
“Sn” will appear in the DATE LCD and a number will be flashing next to
it.
5.
Press and release the
ALM/+
button to select the duration of the snooze.
Note:
The snooze can be set for 0 to 30 minutes in 5-minute increments. If 0 minutes is selected pressing the
WIND/SNZ
button will deactivate the alarm and it will not come back on.
6.
Press and release the
SET
button to confirm and advance to the temperature format setting.
XI.
SELECTING
°
F OR
°
C
1.
Press and hold the
SET
button for 5 seconds.
2.
“LCD” will show in the time LCD and the number setting will flash.
3.
Press and release the
SET
button eleven times.
4.
Either ”
°
F” or “
°
C” will flash in the TIME LCD.
5.
Press and release the
ALM/+
button to select the temperature format.
6.
Press and release the
SET
button to confirm and advance to the forecast
sensitivity setting.
XII.
SETTING THE FORECAST SENSITIVITY
Note:
The forecast sensitivity can be adjusted to allow for areas that have
a higher or lower sensitivity to changing air pressure (for example coastal
areas have more pressure change than areas such as southern Arizona).
The numbers correspond to the amount of air pressure change necessary to
trigger a change in the forecast icon. Areas that tend to have more air
pressure change would set the sensitivity to 3, while areas that experience
lower than normal air pressure change would set the sensitivity to 1.
1.
Press and hold the
SET
button for 5 seconds.
2.
“LCD” will show in the TIME LCD and the number setting will flash.
3.
Press and release the
SET
button twelve times.
