background image

 

18

This warranty gives you specific legal rights. You may also have other rights specific to your State. Some States 
do no allow the exclusion of consequential or incidental damages therefore the above exclusion of limitation 
may not apply to you. 
 
For warranty work, technical support, or information contact 
 

La Crosse Technology 

190 Main Street 

La Crescent, MN 55947 

Phone: 507.895.7095 

Fax: 507.895.8000 

e-mail: 

support@lacrossetechnology.com 

(warranty work) 

sales@lacrossetechnology.com 

(information on other products) 

web: 

www.lacrossetechnology.com 

 

Questions ? Please see instruction video at 

www.lacrossetechnology.info/9043

 

 
 
 
 
 
 
 
FCC DISCLAIMER 

 
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE 
FOLLOWING TWO CONDITIONS: 
1. THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND 
2. THIS DEVICE MUST ACCEPT INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT 

MAY CAUSE UNDESIRED OPERATION. 

 

FCC ID: OMO-01RX (Receiver), OMO-01TX (transmitter) 

 

Freq. 433.92 MHz 

La Crosse Technology 

Made in China 

WS-9043U 

 
 
 
 
All rights reserved. This handbook must not be reproduced in any form, even in excerpts, or duplicated or 
processed using electronic, mechanical or chemical procedures without written permission of the publisher. 
This handbook may contain mistakes and printing errors. The information in this handbook is regularly checked 
and corrections made in the next issue. We accept no liability for technical mistakes or printing errors, or their 
consequences. 
All trademarks and patents are acknowledged. 

Summary of Contents for WS-9043U




















Reviews: