background image

 

17

 

 

COMFORT LEVEL INDICATOR: 

Dry 

:

 

the “Dry” indicator will appear when the relative humidity range is lower than 45%.  

Comfort 

:   the “Comfort” indicator will appear when the relative humidity range is between 45% and 65% and the 

temperature range is between 68ºF and 78.6ºF (20.0ºC and 25.9ºC). 

Wet

 

:  the “Wet” indicator will appear when the relative humidity range is higher than 65%. 

 
 
 

 
 

HAPY/SAD FACE COMFORT LEVEL INDICATOR: 

 (happy face)  :   A happy face icon “

” indicating a temperature level between 68ºF and 78.6ºF (20°C and 25.9°C) 

and relative humidity reading between 45% and 65%.  

 (sad face) 

:  A sad face icon “ ” indicating any value outside the comfortable range.  

 

OUTDOOR TEMPERATURE AND HUMIDITY: 

 
 
 
 
 
 
 

The seventh LCD section can show the outdoor temperature, the reception indicator, the minimum or maximum 
reading. A number in the bottom part will also be shown if more than one transmitter has been used. 

 

TOGGLING BETWEEN MIN/MAX INDOOR AND OUTDOOR RECORDINGS:

 

To toggle between the current, minimum and maximum data and the times they were recorded, press the MIN/- key for 
viewing the minimum values, and press the MAX/+ key for viewing the maximum values (shown in MIN or Max 
displays). 

 

When pressing the MIN/- or the MAX/+ key, the MIN and the MAX data will be displayed as following sequences: 
1. 

MAX or MIN outdoor temperature data with time and date of recordings. Data will flash 

2. 

MAX or MIN outdoor humidity data with time and date of recordings. Data will flash 

3. 

MAX or MIN indoor temperature data with time and date of recordings. Data will flash 

4. 

MAX or MIN indoor humidity data with time and date of recordings. Data will flash 

5. 

Return to current indoor and outdoor data. 

 

TO VIEW THE MIN/MAX DATA FROM DIFFERENT TRANSMITTERS 

MIN/MAX data from other transmitters can only be displayed if there is more than 1 transmitter used. 

1. 

To toggle between transmitters, press the CH key: 
Once to show transmitter 2 
Twice to show transmitter 3 
Three times to return to transmitter 1 

2. 

While the outdoor MIN/MAX humidity and temperature date is being displayed, press the CH key. The display will 
toggle between the different channels MIN/MAX data.  

 

Note: 

 

For example, when the MIN outdoor temperature data is displayed and the MAX/+ key is pressed, MAX data outdoor 
temperature will be displayed. If the MAX outdoor temperature data is displayed and the MIN/- key is pressed, MIN 
outdoor data will be displayed.  

 

While MIN/MAX data is displayed, the channel can be changed by pressing the CH key. 

 
 

Outdoor 
temperature 
in °F or °C 

Transmitter identification number (only if there is more than one transmitter) 

Outdoor 
reception signal 

Outdoor humidity 
display in RH% 

Summary of Contents for WS-9119U

























Reviews: