background image

 

23

 

 

WARRANTY INFORMATION 

La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in 
materials and workmanship. 
 
This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North 
America and only to the original purchaser of this product.  To receive warranty service, the purchaser must contact La 
Crosse Technology, Ltd for problem determination and service procedures.  Warranty service can only be performed by 
a La Crosse Technology, Ltd authorized service center.  The original dated bill of sale must be presented upon request 
as proof of purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd’s authorized service center. 
 
La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with 
new or reconditioned parts or products if found to be defective during the limited warranty period specified above.  All 
replaced parts and products become the property of La Crosse Technology, Ltd and must be returned to La Crosse 
Technology, Ltd.  Replacement parts and products assume the remaining original warranty, or ninety (90) days, 
whichever is longer.  La Crosse Technology, Ltd will pay all expenses for labor and materials for all repairs covered by 
this warranty.  If necessary repairs are not covered by this warranty, or if a product is examined which is not in need or 
repair, you will be charged for the repairs or examination.  The owner must pay any shipping charges incurred in getting 
your La Crosse Technology, Ltd product to a La Crosse Technology, Ltd authorized service center.  La Crosse 
Technology, Ltd will pay ground return shipping charges to the owner of the product to a USA address only. 
 
Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship with the following specified 
exceptions: (1) damage caused by accident, unreasonable use or neglect (including the lack of reasonable and 
necessary maintenance); (2) damage occurring during shipment (claims must be presented to the carrier); (3) damage 
to, or deterioration of, any accessory or decorative surface; (4) damage resulting from failure to follow instructions 
contained in your owner’s manual; (5) damage resulting from the performance of repairs or alterations by someone 
other than an authorized La Crosse Technology, Ltd authorized service center; (6) units used for other than home use 
(7) applications and uses that this product was not intended or (8) the products inability to receive a signal due to any 
source of interference..  This warranty covers only actual defects within the product itself, and does not cover the cost of 
installation or removal from a fixed installation, normal set-up or adjustments, claims based on misrepresentation by the 
seller or performance variations resulting from installation-related circumstances. 
 
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE, 
OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF THIS PRODUCT.  
THIS PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION.  THIS 
PRODUCT IS NOT A TOY.  KEEP OUT OF CHILDREN’S REACH. 
 
This warranty gives you specific legal rights.  You may also have other rights specific to your State.  Some States do no 
allow the exclusion of consequential or incidental damages therefore the above exclusion of limitation may not apply to 
you. 
 
For warranty work, technical support, or information contact: 
 

La Crosse Technology 

2809 Losey Blvd. S. 

La Crosse, WI 54601 

Phone: 608.782.1610 

Fax: 608.796.1020 

 

e-mail: 

support@lacrossetechnology.com

 

(warranty work) 

 

sales@lacrossetechnology.com

 

(information on other products) 

web: 

www.lacrossetechnology.com

 

 
 

Summary of Contents for WS-9119U

























Reviews: