background image

 

 

 

ALM STOP key 

FUNCTION KEYS: 

 

Intelligent Weather Station: 

The intelligent weather station has 6 easy to use function keys on the bottom front and 1 key on the top front. 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
SET key 

 

Press and hold the key to enter manual setting modes: LCD contrast, 12/24 hour time display, time zone, manual 
time setting, calendar, WWVB ON/OFF, ºF/ºC temperature unit, pressure unit, relative pressure setting and 
language display   

 

Alarm time set inside alarm time setting mode 

 

Confirm key inside weather alarm setting mode 

 

Reset individual MIN/MAX temperature/humidity record 

 

Combine with the CH key to re-detect a new transmitter in displayed channel 

 

Stop the alarm during the time alarm or weather alarm ringing 

 Back-light 

ON 

 

CH key (Channel key)

 

 

Select channel 1, 2, or 3 (if more than 1 transmitter is used) 

 

Exit setting mode 

 

Re-detect new transmitters signal for all channels 

 

Combined with the set key to re-detect a new transmitter in displayed channel 

 

Stop the alarm during the time alarm or weather alarm ringing 

 Back-light 

on 

 

MAX/+ key

 

 

Display MAX indoor and outdoor temperature and humidity records with time of recording 

 

Activate/deactivate the time alarm 

 

Increase the alarm time (hour and minutes) 

 

Increase all values in manual setting modes 

 Activate/deactivate the weather alarm 

 

Increase the weather alarm values 

 

Stop the alarm during the time alarm or weather alarm ringing 

 Back-light 

on 

 

Reset all MIN/MAX records 

 

MIN/- key 

 

Display MIN indoor and outdoor temperature and humidity records with time of recording 

 

Activate/deactivate the time alarm 

 

Decrease the alarm time (hour and minutes) 

 

Decrease all values in manual setting modes 

 Activate/deactivate the weather alarm 

 

Decrease the weather alarm values 

 

Stop the alarm during the time alarm or weather alarm ringing 

 Back-light 

on 

 

Reset all MIN/MAX records 

ALM TIME key 

SET key

MAX/+ key

CH key 

MIN/- key 

ALM 
DATA 
key 

Summary of Contents for WS-9119U

























Reviews: