background image

 

 

 

Time alarm icon 

TIME ALARM SETTING 

 
 
 
 

 

The alarm time can be set when pressing the ALM TIME key.  
1. 

Press and hold the ALM TIME key until the “ALARM” digits are shown and flash. Use the MAX/+ or MIN/- key to 

set the alarm ON/OFF. The time alarm icon “ 

“ is shown to indicate that the alarm is ON. 

2. 

Press the SET key to enter the alarm time set mode. The hour digit start flashing 

3. 

Press the MAX/+ or MIN/- key to set the hour.  

4. 

Press the SET key to switch to the minutes. The minute digits start flashing. 

5. 

Use the MAX/+ or MIN/- key to set the alarm minutes. 

6. 

Confirm with the SET key and exit the 

Time Alarm setting 

or wait for automatic timeout.  

 

Note:  

The maximum alarm ring duration is 2 minutes.  
To stop the alarm, press any key during alarm ringing. 

 

WEATHER ALARM SETTING 

The intelligent weather station can be set to alert when a specific weather condition is reach.  

 

The following Weather Alarm settings can be changed when pressing and holding the ALM DATA key for 
approximately 4 seconds: 

 

LOW indoor temperature alarm 

 

HIGH indoor temperature alarm 

 

LOW outdoor temperature alarm 

 

HIGH outdoor temperature alarm 

 

LOW indoor humidity alarm 

 

HIGH indoor humidity alarm 

 

LOW outdoor humidity alarm 

 

HIGH outdoor humidity alarm 

 

LOW air pressure alarm 

 

Default alarm values: 

Temperature Low  32ºF 
 High 

86ºF 

Humidity Low 

20% 

 High 

90% 

Air pressure 

Low 

29.52 
inHg 

 
LOW INDOOR TEMPERATURE ALARM SETTING 

Note: 

After pressing the ALM DATA key within the LOW indoor temperature alarm setting there are the following individual 
sub-settings.  

 

To set the LOW indoor temperature alarm (default OFF):  
I. 

Buzzer ON/OFF (alarm sounding): 

 

1. 

Press the ALM STOP key to set buzzer ON/OFF. The “ 

 “ icon will appear if the buzzer alarm is ON. No 

acoustic alarm signal will be heard when the weather alarm is trigged if buzzer is set OFF. 

 

II. 

Set the alarm ON/OFF: 

1. 

Press the MAX/+ or MIN/- key to activate the alarm ON/OFF. 

 

III. 

Set the alarm value (default 32ºF)

 

1. 

Press the SET key to enter the alarm value setting (alarm value flashing) 

Alarm time 

Summary of Contents for WS-9119U

























Reviews: