32
* When the outdoor signal is successfully received by the Weather Station,
this icon will be switched on. (If not successful, the icon will not be shown in
LCD) So user can easily see whether the last reception was successful (icon
on) or not (icon off).
MANUAL SETTINGS:
The following manual settings can be done in the setting mode:
•
Time zone
•
Time reception DCF ON/OFF
•
Manual time
Press the
SET
key and hold down for a few seconds to enter the setting mode.
TIME ZONE SETTING:
The time zone default is "0”
hour. To set a different time zone:
1.
The current time zone value starts flashing.
2.
Use the
+
key to set the time zone. The range runs from 0, -1, -2…
-12, 12, 11, 10… 2, 1, 0, in consecutive 1-hour intervals.
3.
Confirm with the
SET
key and enter the
Time reception On/Off
setting
.
Time zone (flashing)