18
TROUBLESHOOTING
Problem:
No reception of WWVB time signal.
Solution:
1) Wait overnight for signal.
2) Be sure indoor weather station is at least 6 feet from any electrical devices such
as televisions, computers or other radio-controlled clocks.
3) Remove batteries for five minutes, reinsert and leave the unit alone overnight
without pressing buttons.
4) If there are still problems, contact La Crosse Technology.
Problem:
Hour is incorrect (minute and date are correct).
Solution:
Be sure correct time zone and daylight saving time is selected.
Problem:
The LCD is faint
Solution:
1) Set the LCD contrast to a higher number
2) Replace batteries
Problem:
No outdoor temperature is displayed.
Solution:
1) Remove all batteries, reinsert into remote temperature sensor first, then into the
indoor temperature station.
2) Place remote temperature sensor closer to the indoor temperature station.
3) Be sure all batteries are fresh.
NOTE: For problems not solved, please contact La Crosse Technology.
MAINTENANCE AND CARE INSTRUCTIONS
Extreme temperatures, vibration and shock should be avoided to prevent damage to
the units.
Clean displays and units with a soft, damp cloth. Do not use solvents or scouring
agents. They may mark the displays and casings.
Do not submerge in water.
Immediately remove all low powered batteries to avoid leakage and damage.
Opening the casings invalidates the warranty. Do not try to repair the unit. Contact
La Crosse Technology for repairs.
