Humidity level
bar graph
Indoor temperature
in ºF
Indoor comfort
indicator icon
Indoor relative
humidity in %
Low battery icon
TEMPERATURE STATION
1.
Insert finger or other solid object in the space at the right
center of the battery compartment and lift up to remove
the cover.
INTRODUCTION:
Congratulations on purchasing this temperature station with indoor temperature, humidity and comfort
indicator. To enjoy the full benefits of this innovative product, please read this operating manual
completely before operating.
2.
Insert batteries observing the correct polarity (see
marking).
3.
Replace battery compartment cover.
TEMPERATURE STATION:
TO RESET THE TEMPERATURE STATION:
1.
Remove the batteries from the Temperature Station
2.
Wait at least 30 seconds and repeat the procedures in
Setting up
above
BATTERY CHANGE:
It is recommended to replace the batteries in all units on an annual basis to ensure optimum accuracy of
this unit.
Please participate in the preservation of the environment. Return used batteries to an
authorized depot.
FUNCTION KEYS:
FEATURES:
The weather station has 1 key function that is easy to use:
•
Indoor temperature display in degree Fahrenheit (°F)
•
Indoor humidity display in RH%
MIN/MAX key:
•
Indoor temperature and humidity display with MIN/MAX recordings
•
Toggle between MIN/MAX indoor temperature
•
Relative humidity level bar
•
Toggle between MIN/MAX indoor humidity data
•
Indoor comfort indicator icon
•
Reset MIN/MAX records by pressing and holding the key for 2 seconds
•
Low battery indicator
LCD SCREEN
•
Wall mounting or table standing
The Temperature Station’s LCD is divided into 3 sections, displaying humidity level in a bar graph format,
indoor humidity and indoor temperature.
SETTING UP:
Please follow these steps to ensure that your new temperature station works correctly:
1.
Insert the batteries into the temperature station. See “
How to install and replace batteries in the
Temperature Station
” below.
2.
Once the batteries are in place, all segments of the LCD will light up briefly. Then the indoor
temperature, humidity and level bar will be displayed. If the indoor temperature is not displayed
after a few seconds, remove the batteries and wait for at least 30 seconds before reinserting them.
HOW TO INSTALL AND REPLACE BATTERIES IN THE WEATHER STATION:
The temperature station uses 2 x AAA, 1.5V batteries. To install and replace the batteries, please follow
the steps below:
Hanging hole
Battery
compartment
Foldable stand
MIN/MAX key
LCD
display
