10
1.
The hour digit will start flashing.
2.
Use the CH/+ key to set the hour.
3.
Press again the SET key to set the minutes. The minute digits start flashing.
4.
Use the CH/+ key to set the minutes.
5.
Confirm with the SET key and enter the
Calendar setting
.
Note:
The unit will still try to receive the signal between 12:00 to 6:00 a.m. every day even if the time has been
manually set and if the WWVB time reception function has been set ON. When it does receive the signal, it
will change the manually set time into the received time. During reception attempts the WWVB tower icon
will flash. If reception has been unsuccessful, then the WWVB tower icon will not appear but reception will
still be attempted the following hour.
CALENDAR SETTING:
The date default of the weather projection station is 1. 1. in the year 2003. Once the radio-controlled time
signals are received, the date is automatically updated. However, if the signals are not received, the date
can also be set manually.
1.
The year starts flashing.
2.
Use the CH/+ key to set the year (between year 2003-2029).
3.
Press the SET key again to confirm and to enter the month setting. The month starts flashing.
4.
Use the CH/+ key to set the month.
5.
Press the SET key again to confirm and to enter the date setting mode. The date starts flashing.
6.
Use the CH/+ key to set the date.
7.
Confirm all calendar settings with the SET key and enter the
Snooze setting
.
SNOOZE SETTING:
The snooze time can be set OFF to a maximum time of 30 minutes (default is 10 minutes):
1.
Use the CH/+ key to set the snooze time. Each pressing of the key will increase the snooze time by 5
minutes. The snooze can also be set OFF when the “OFF” digit is being displayed.
2.
Confirm with the SET key and enter the
Temperature setting
Note:
If the snooze time has been set “OFF”, the snooze function will not be activated.
°F/°C TEMPERATURE SETTING:
Digit flashing
Snooze time
