15
CALENDAR SETTING
The date default of the Weather Station is January 1
st
, 2006 (01.01.06), after initial set-
up. The date is only used for recording of MIN/MAX values and only show during set-
up. Once the radio-controlled time signals are received, the date is automatically
updated. However, if the signals are not received, the date can also be set manually.
To do this:
1.
Using the + key, set the year. The range runs from 2003 to 2029 (default is
2006).
2.
Press the SET key to enter the month setting mode.
3.
The month digit will be flashing. Press the + key to set the month and then press
the SET key to go to the date setting.
4.
The date digit will be flashing. Press the + key to set the date.
5.
Confirm with the SET key and enter the “
°F/°C TEMPERATURE UNIT
SETTING”
or exit the setting mode by pressing the CH key.
Year
"Date. Month." (for 24h time display)
"Month. Date." (for 12h time display)
