background image

 

33

Outdoor data checking interval 

 

:  

every 8 seconds 

Power consumption 

Temperature Station 

 

:  

2 x AA, IEC LR6, 1.5V 

Outdoor Temperature Transmitter : 

2 x AAA, IEC LR3, 1.5V 

Battery life cycle (Alkaline batteries recommended): 

 

Temperature Station 

 

approximately 24 months 

Outdoor Temperature Transmitter : 

approximately 12 months 

 
Dimensions (L x W x H) 

Temperature Station 

:  

79.8 x 29 x 127mm 

Outdoor Temperature Transmitter :  

32.4 x 14.1 x 86.5mm 

 

LIABILITY DISCLAIMER: 

 

The electrical and electronic wastes contain hazardous substances. Disposal of 
electronic waste in wild country and/or in unauthorized grounds strongly damages 
the environment. 

 

Please contact your local or/and regional authorities to retrieve the addresses of 
legal dumping grounds with selective collection. 

 

All electronic instruments must from now on be recycled. User shall take an active 
part in the reuse, recycling and recovery of the electrical and electronic waste. 

 

The unrestricted disposal of electronic waste may do harm on public health and the 
quality of environment. 

Summary of Contents for WS9245


















Reviews: