21
The Outdoor Temperature Transmitter
•
Remote transmission of outdoor temperature to
Temperature Station by 868 MHz signals
•
Rain proof casing
•
Wall mounting and table-standing
•
Mounting at a sheltered place. Avoid direct rain and
sunshine
SETTING UP:
Note: this temperature station can only receive one transmitter only.
1.
First, insert the batteries to the transmitter (see “
How to install and replace
batteries in the Temperature transmitter
”
below).
2.
Within 30 seconds of powering up the transmitter, insert the batteries to the
Temperature Station (see “
How to install and replace batteries in the
Temperature station
”
below). Once the batteries are in place, all segments of the
LCD will light up briefly. Following the indoor temperature, the time as 0:00 will be
displayed. If they are not shown in LCD after 60 seconds, remove the batteries and
wait for at least 60 seconds before reinserting them. Once the indoor data is
displayed user may proceed to the next step.
