3
Year
°F/°C TEMPERATURE UNIT SETTING
The default temperature reading is set to °F (Fahrenheit). To select °C (Celsius):
3. The
“°F/
°
C” will be flashing, use the + key to toggle between “°F” and “°C”.
4.
Once the desired temperature unit has been chosen, confirm with the SET to advance to the
12/ 24 hr time format.
12/ 24 HR TIME FORMAT
The time display can be selected to show hours in 12-hour or 24-hour settings. (Default 12-Hour)
1.
Press the + key to toggle between “12H” or “24H”.
2.
Confirm with the SET key and enter the
Manual time setting
.
MANUAL TIME SETTING
To set the clock:
1.
The hour digits start flashing in the time display section.
2.
Use the + key to adjust the hours and then press SET key to go to the minute setting.
3.
The minute will be flashing. Press the + key to adjust the minutes.
4.
Confirm with the SET key and enter the
“Calendar Setting”.
CALENDAR SETTING
The date default of the clock is 1. 1. of the year 2006 after initial set-up.
To set the date:
1.
Using the + key, set the year required. The range runs from 2006 to 2036 (default is 2006).
2.
Press the SET key to enter the month setting mode.
3.
The month digit will be flashing. Press the + key to set the month and then press the SET key to
go to the day setting.
4.
The day digit will be flashing. Press the + key to set the day.
5.
Confirm with the SET and return to the normal display.
Note:
The weekday will be automatically set. In normal display, the time will not be shown.
Minutes (flashing)
Hours (flashing)
flashing
flashing
"Month/ Date" – when 12 hour time is chosen;
"Date/ Month" – when 24 hour time is chosen.
