La Crosse Technology, Ltd
Page 4
•
If the hands continue to jump, the movement may need replacement.
HANDS STUCK AT CERTAIN TIME
•
This is indicative of a low or overpowered battery (number 1 warranty issue).
•
Replace battery and perform restart procedure. Allow up to 5 days to receive a signal.
•
Check to see if the hands may be bent.
•
Movement may need replacement.
HANDS ARE LOOSE.
•
If under warranty, the clock must be sent in for repair or the movement needs to be
replaced.
POSITION THE CLOCK
•
This La Crosse Technology
®
atomic clock is designed for indoor or outdoor use.
•
INDOOR:
Select a location to place the radio-controlled clock where it will be at least six feet
away from a TV, computer, air conditioner or other household electrical appliances. The
optimal location is near a window. Windows facing Colorado provide the best signal.
•
OUTDOOR:
Select a location
sheltered
from direct sunlight and rain, preferably under a
roof or porch area, and facing Colorado for better reception of the WWVB signal.
•
This clock is designed for indoor and outdoor use: but only in a dry environment and in a
temperature range between -10°F and 131°F.
Note:
The clock is NOT waterproof. If left in the elements water may enter the clock and
damage it.
HOW DO I ADJUST THE TEMPERATURE OR HUMIDITY?
•
With a flat tipped screwdriver, gently turn the temperature or humidity sensor screw at the
back of the clock to the desired setting.
