2
DISPLAY OPTIONS
POSITIONING OR MOUNTING CLOCK
There are two possible ways to mount clock: use of the foldable table stands, or
wall mounting.
FOLDABLE TABLE STANDS
The foldable table stands legs are located on the backside.
Unfold the stands out, below the battery compartment. Once
the foldout table stands are extended, place the clock in an
appropriate location.
WALL MOUNTING
Install three mounting screws (not included) into a wall—
leaving approximately 3/16 of an inch (5mm) extended from
the wall. Place the clock onto the screws, using the three
hanging holes on the backside. Gently pull the clock down to
lock the screws into place.
NOTE:
Always ensure that the clock locks onto the screws
before releasing.
BATTERY REPLACEMENT
Low batteries should be changed to avoid the damage resulting from a leaking
battery.
If you notice that the LCD appears faint or is not working properly, or the low
battery symbol appears above the seconds, try a fresh AA alkaline battery before
contacting customer support.
We recommend that you replace the batteries regularly to ensure optimum
accuracy of this unit.
Help us to keep our environment clean.
Please do not
dispose of old electronic devices and empty batteries
in household waste. To protect the environment, take
them to your retail store or to appropriate collection
sites according to national or local regulations.
INTENDED USAGE AND SAFETY
Keep the instrument in a dry place.
Do not expose the instrument to extreme temperatures, vibration or shock.
Clean it with a soft damp cloth. Do not use solvents or scouring agents.
If the unit does not work properly, change the battery.
The product is not a toy. Keep it out of reach of children.
The product is not to be used for medical purpose or for public information,
but is determined for home use only.
The specifications of this product may change without prior notice.
Improper use or unauthorized opening of housing will void the warranty.
SPECIFICATIONS:
Indoor Temperature Range
: 14.4°F to 99.9°F (-9.9°C to +59.9°C). Reads OFL if
outside this range.
Resolution
:
0.2°F (0.1 °C)
Measuring Period
: Every 60 seconds.
Battery:
Requires 1 x LR6 (AA) alkaline battery (not
included).
Clock Size
: 9.23 L x 7.61 H x 1.04 inches W (234.4 L x 193.4 H
x 26.3mm W)
Time Display
: Numbers are 1.77 inches H (4.5 cm)
WARRANTY INFORMATION
La Crosse Technology, Ltd provides a 1-year limited warranty on this product
against manufacturing defects in materials and workmanship.
This limited warranty begins on the original date of purchase, is valid only on
products purchased and used in North America and only to the original purchaser
of this product. To receive warranty service, the purchaser must contact La
Crosse Technology, Ltd for problem determination and service procedures.
Warranty service can only be performed by a La Crosse Technology, Ltd
authorized service center. The original dated bill of sale must be presented upon
request as proof of purchase to La Crosse Technology, Ltd or La Crosse
Technology, Ltd’s authorized service center.
La Crosse Technology, Ltd will repair or replace this product, at our option and at
no charge as stipulated herein, with new or reconditioned parts or products if
found to be defective during the limited warranty period specified above. All
replaced parts and products become the property of La Crosse Technology, Ltd
and must be returned to La Crosse Technology, Ltd. Replacement parts and
products assume the remaining original warranty, or ninety (90) days, whichever is
longer. La Crosse Technology, Ltd will pay all expenses for labor and materials for
all repairs covered by this warranty. If necessary repairs are not covered by this
warranty, or if a product is examined which is not in need or repair, you will be
charged for the repairs or examination. The owner must pay any shipping charges
incurred in getting your La Crosse Technology, Ltd product to a La Crosse
Technology, Ltd authorized service center. La Crosse Technology, Ltd will pay
ground return shipping charges to the owner of the product to a USA address only.
Your La Crosse Technology, Ltd warranty covers all defects in material and
workmanship with the following specified exceptions: (1) damage caused by
accident, unreasonable use or neglect (including the lack of reasonable and
necessary maintenance); (2) damage occurring during shipment (claims must be
presented to the carrier); (3) damage to, or deterioration of, any accessory or
decorative surface; (4) damage resulting from failure to follow instructions
contained in your owner’s manual; (5) damage resulting from the performance of
repairs or alterations by someone other than an authorized La Crosse Technology,
Ltd authorized service center; (6) units used for other than home use (7)
applications and uses that this product was not intended or (8) the products
inability to receive a signal due to any source of interference.. This warranty
covers only actual defects within the product itself, and does not cover the cost of
installation or removal from a fixed installation, normal set-up or adjustments,
claims based on misrepresentation by the seller or performance variations
resulting from installation-related circumstances.
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR
INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES
ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF THIS
PRODUCT. THIS PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES
OR FOR PUBLIC INFORMATION. THIS PRODUCT IS NOT A TOY. KEEP OUT
OF CHILDREN’S REACH.
This warranty gives you specific legal rights. You may also have other rights
specific to your State. Some States do not allow the exclusion of consequential or
incidental damages therefore the above exclusion of limitation may not apply to
you.
For warranty work, technical support, or information contact:
La Crosse Technology, Ltd
2817 Losey Blvd. S.
La Crosse, WI 54601
Online: www.lacrossetechnology.com/support
All rights reserved. This handbook must not be reproduced in any form, even in excerpts, or
duplicated or processed using electronic, mechanical or chemical procedures without written
permission of the publisher.
This handbook may contain mistakes and printing errors. The information in this handbook is
regularly checked and corrections made in the next issue. We accept no liability for technical
mistakes or printing errors, or their consequences. All trademarks and patents are
acknowledged.
CHANGE DISPLAY:
From Timer mode, stop the timer. Then press and hold the
DATE/MEMO button to change from Timer to Date display.
NOTE:
Date will show M/D when the clock is in 12-hour mode, and
will show as D/M in 24-hour mode.
Countdown Timer or Month/Date Display
EJMA8100L210
Printed in China
