Page | 3
Wireless Weather Forecast Station with Colored LCD Display
Insert batteries (in any order):
• 2-AA batteries into thermo-hygro sensor
• 5 volt power cord (required) into WW85777v2 station
*3-AAA batteries for optional backup of your time and date
STEP 1:
Power Up
STEP 2:
Mounting Basics
At this time, all of your sensor information should be displayed on your station.
Here are a few quick tips for mounting your sensor:
• Keep out of direct sunlight & ensure the sensor is well-ventilated.
• We recommend mounting under a deck or eave facing north.
• Insert the mounting screw through the front of the sensor and into the wall.
• Tighten the screw to snug (do not over tighten).
• Be sure the outdoor sensor is mounted vertically to drain moisture.
• The maximum wireless transmission range is over 330 feet (100 meters) in open air, not including walls or
floors.
AAA
AAA
AAA
AA
AA
AA
AA
AC 5.0V
You can manually adjust your station’s settings:
1. Hold the SET button for 3 seconds to enter settings menu.
2. Press and release the + or - buttons to adjust the flashing values. Hold to adjust quickly.
3. Press and release the SET button to confirm and move to the next item.
Note:
Press and release the LIGHT button any time to exit settings
STEP 3:
Set Time, Date, etc.
