La Crosse Technology, Ltd. www.lacrossetechnology.com/support
Page 10
2. Press and release the
+ (PLUS)/-
buttons to adjust values.
3. Press and release the
ALERTS
button to confirm adjustments and
move to the next item.
Alert setting order:
Outdoor Temp HI
Outdoor Temp LO
Outdoor Hum HI
Outdoor Hum LO
Indoor Temp HI
Indoor Temp LO
Indoor Hum HI
Indoor Hum LO
ARM/DISARM Alerts
•
Hold for 2 seconds, then release the ALERTS
button to view High and Low alerts with flashing.
•
Press the
PLUS
button to arm an alert.
•
Press the
MINUS
button
to disarm an alert.
Weather Station
Power Requirements
•
This weather station is powered by a 5-volt AC power adapter
•
Alternatively, optional 3-AAA alkaline batteries may be used.
12-Hour or 24-Hour time format
•
Time can display in 12-hour (am, pm) or 24-hour format.
•
Default is 12-hour time.
•
Use the
to switch time formats.
Fahrenheit/Celsius
•
Use the
to switch between Fahrenheit and Celsius.
Backlight
Try this exercise in a dim room. The weather station has a bright, dim, and OFF setting for the
backlight. Wait 15 seconds after pressing the LIGHT HI-LO-OFF button to see if the backlight stays
on. This will ensure it is not in OFF mode.
1. Be sure the AC cord is plugged in correctly to the weather station and the outlet.
2. Remove the batteries.
