background image

La Crosse Technology, Ltd.          www.lacrossetechnology.com/support 

Page 5 

 

 

If the temperature remains on while in the house, then it is likely a 

distance/resistance 

issue.  

 

Move the outdoor sensor to different locations outside to find a location where the 
temperature reading will hold. 

 

Outdoor Temperature is stuck or HH.H, LL.L 

 

Explanation: 

These symbols are error messages indicating the outdoor sensor is outside of its 

readable range. 
 

 

Check 

Batteries.

 Overpowered or underpowered batteries can cause this reading. 

 

Replace the outdoor sensor.

 

Note: 

The last outdoor reading may remain (not change) for several hours when the connection is 

lost. The outdoor temperature reading will flash when the connection is first lost or intermittent.  
 

Outdoor sensor drains batteries quickly 

 

 

Test a new set of alkaline batteries. Write down the date of installation and the voltage of 
the batteries. 

 

When the batteries fail, please note the date and voltage again.  

 

Check the 

distance

 and 

resistance

 between the outdoor sensor and the weather station. 

Outdoor sensors at the end of the range may work while batteries are fresh but not after 
they drain a bit. 

 

Check for leaking batteries, which may damage the outdoor sensor. 

 

Battery life is over 24 months when using reputable battery brands for both Alkaline and 
Lithium batteries. 

 

Outdoor Humidity goes to dashes when the temperature is cold. 

 

 

The outdoor temperature/humidity sensor designed to work with this weather station will 
drop the outdoor humidity and dew point reading in cold temperatures.  

 

The humidity and dew point will return when the temperature rises. This is how the sensor 
came from the factory. The temperature itself will continue to read. 

 

The outdoor sensor fell. The sensor no longer works 

 

Explanation:

 If there is no physical damage to the outdoor sensor, the fall may not have caused 

internal damage. A fall can shock the outdoor sensor or the batteries in the outdoor sensor. 
Batteries that have fallen on a hard surface may be damaged and unable to function properly. 
 

 

Complete a 

Restart

 with fresh batteries. 

 

Us

Batteries 

dated at least six years in advance of the current year. Batteries dated earlier 

than six years from now may still work but may be unstable in performance. 

Note: 

A outdoor sensor that has fallen into a puddle, snow, or other standing water, will likely have 

water damage and need to be replaced. Outdoor sensors are water resistant, not waterproof. 
 

Replacement Outdoor sensors 

 

 

Visit your local Retailer or La Crosse Technology® Store 

http://store.lacrossetechnology.com/

  

 

Note

: Be sure to order the correct model and frequency to avoid receiving the incorrect item.  

Summary of Contents for WW85777v2















Reviews: