La Crosse Technology Technical Support, Rev. 1.1
Page 16
Wind Direction
alarm
Rainfall
amount in 24-hour period alarm.
2-
Press and hold the SET button for 2 seconds and you will see the selected value
flashing. Press and release the
▲
UP ARROW key or
▼
DOWN ARROW key to set the
alarm value.
NOTE
: Hold the arrow key in to change the value faster.
3-
Press the ALARM key to confirm the setting. The digit will stop flashing. Repeat
these steps with each alarm value you wish to set.
ACTIVATE/DEACTIVATE ALARM:
Press the SET button to switch the Alarm On or Off. The ((( ))) icon indicates the
alarm is switched on.
When you press the SET button the ((( ))) icon should disappear and that alarm is
off.
Set Storm Alarm:
Enter the program menu until you see:
STORM ALARM SENSITITY:
The Storm Alarm Sensitivity will flash. The default
setting of .15 works well in most areas, however you may need to adjust this level
up or down depending on local conditions. Use the UP ARROW or DOWN ARROW
button to adjust then press and release the SET button.
STORM ALARM:
AON or AOFF will flash. This will turn the Storm Alarm ON and
Storm Alarm OFF. Use the UP ARROW or DOWN ARROW button to toggle the
Storm Alarm ON and OFF, then press and release the SET button.
MIN/MAX SETTINGS
The weather station records the maximum and minimum value of the various
weather data with time and date stamp automatically. You can view the following
by pressing the MIN/MAX key in normal display mode:
MIN/MAX Indoor Temperature
MIN/MAX Indoor Humidity
MIN/MAX Outdoor Temperature
MIN/MAX Dew Point Temperature
MIN/MAX Outdoor Humidity
MAX Wind Gust
Total Rainfall
Reset the MIN/MAX weather data
: To reset the MIN/MAX weather data, you
need to reset each of the values independently.
