Model: 308-1425C www.lacrossetechnology.com/support
pg. 3
INITIAL SETUP
Step 1: Insert 2
new
AA batteries (not included)
into the TX141TH-Bv2 sensor. Observe
the correct polarity.
Step 2: Insert the 5.0 volt AC adapter (included) into the forecast station.
Step 3: (Optional) Insert 3 AAA batteries (not included) into the forecast
station.
Step 4: After 5 minutes, place the sensor outside in a shaded location.
Maximum transmission range is 300 ft. (91 meters).
Note: If the outdoor temperature area shows dashes after 3 minutes, hold
the HEAT/DEW button on the weather station to search for the sensor.
Press the TX button on the sensor to send a signal.
TX
Button
AC Adapter
