Model: 308-1425C www.lacrossetechnology.com/support
pg. 9
Hold the ALERT button for five seconds, until the forecast station beeps, to
select and set temperature alert values. Each alert value will flash
separately during alert set mode.
OUTDOOR HIGH alert will flash. Press the ▼ or ▲ buttons to set the alert
value, and press the ALERT button to confirm. Then press the ALERT
button again switch to OUTDOOR LOW setting.
OUTDOOR LOW alert will flash. Press the ▼ or ▲ buttons to set the alert
value, and press the ALERT button to confirm. Then press the ALERT
button again switch to INDOOR HIGH setting.
INDOOR HIGH alert will flash. Press the ▼ or ▲ buttons to set the alert
value, and press the ALERT button to confirm. Then press the ALERT
button again switch to INDOOR LOW setting.
INDOOR LOW alert will flash. Press the ▼ or ▲ buttons to choose the
value, and press the ALERT button to confirm and exit.
Note: After selecting temperature alert values use the next step to turn
individual alerts ON or OFF.
ARM/DISARM TEMPERATURE ALERTS
In normal time mode, press and release the ALERT button to toggle
between:
o
Outdoor HI
o
Outdoor Lo
o
Indoor HI
o
Indoor LO
Press the ▲ button to arm the selected alert.
The alert bell appears when each alarm is activated.
Press the ▼ button to disarm the selected alert.
OFF will show in the Alerts area if no alert is active.
TEMPERATURE ALERT SOUNDS
When temperature alert sounds, the corresponding alert bell will flash.
The alert beeps once every minute, until the temperature is out of alert
range.
Press any button to stop alert. The alert bell will still show.
Disarm Alert: In normal mode, hold and release the ALERT button to
select the alert to disarm. With HI or LO alert selected, press the ▼ button
disarm alert.
