3
Features
Projects time & outdoor temp. on wall or ceiling
Projection rotates in 90 degree increments
Projection options: (1) Default: toggle between time and temp., (2) time only or (3) temperature only
Time zones: Atlantic Time (AST), Eastern Time (EST), Central Time (CST), Mountain Time (MST),
Pacific Time (PST), Alaskan Time (AKT) & Hawaiian Time (HAT)
Light up color display backlight and projection with a press of a button using battery power OR
continuous light with A/C adapter (ON/OFF option)
Backlight and projection settings: High, low and off
Charge devices with USB charging port: Output 0.5A
Atomic time and date sets itself
12/24 hour time with minutes
Snooze alarm and alarm icon
Calendar: day, date
IN/OUT temperature (°F/°C) with trend arrow
Low battery icon for clock & sensor
Sits on desktop or tabletop
5.0V A/C adapter (included) for primary power and battery backup
Battery life is over 24 months when using the A/C adapter
Initial Setup
1. Insert A/C adapter into the wall outlet then into the display
or
insert 2 AAA batteries (not included)
into the display
(see Power the Atomic Projection Alarm).
The Projection Alarm will light up and
display time and indoor temperature.
2. Insert 2 fresh AA batteries into the transmitter, observing the correct polarity
(see Install Batteries in
the Outdoor Transmitter).
3. Keep the transmitter 5-10 feet from the Projection Alarm for 15 minutes to establish a good
connection.
4. Within 3 minutes, the outdoor temperature should be displayed on the Projection Alarm. If the outdoor
temperature is not displayed after 3 minutes, remove power from the transmitter and the display for
60 seconds and start again from step 1.
5. For optimum 433 MHz transmission, the outdoor transmitter should be placed a distance of no more
than 200 feet (60 meters, open air) from the Projection Alarm.
IMPORTANT:
When operating on A/C power, the backlight, projection and USB charging port will turn off
while the Projection Alarm searches for the WWVB signal, to avoid interference. The backlight and
projection will return after the 2-10 minute search. Then the USB charging port will resume working.
Do Not Mix Old and New Batteries
Do Not Mix Alkaline, Standard, Lithium or Rechargeable Batteries
