Battery power
: Press and release the SNOOZE/LIGHT button and the backlight
will show for 8 seconds, when operating on batteries only.
ALARM SET:
ALARM HOUR
: Press and hold ALARM button to enter alarm time setting mode.
The Alarm Hour will flash. Use the +/RCC or -/°C/°F button to set the Hour. Press
and release the ALARM button.
ALARM MINUTE
: The Alarm Minutes will flash. Use the +/RCC or -/°C/°F button
to set the Minutes. Press and release the ALARM button to exit.
ALARM ACTIVATION
:
Press and release the ALARM button once to show Alarm Time.
Press and release the ALARM button repeatedly to activate or deactivate the
Alarm. The
alarm icon appears when alarm is activated.
SNOOZE:
When the alarm sounds, press the SNOOZE button to trigger snooze alarm for 10
minutes. The snooze icon
Zz
will flash when the snooze feature is active.
To stop alarm for one day, press ALARM button, while in snooze mode. The alarm
icon will remain solid.
Note
: When the alarm sounds, it continues for 2 minutes and then shuts off
completely.
USB CHARGE PORT:
The integrated USB charging port (on back) will charge devices when the Atomic
Alarm Clock is plugged into a power outlet.
Note:
This is a power output (charging) port only. This port will
not supply power to the Atomic Alarm Clock.
Connect your existing USB charging cord for your external
device to the USB charging port on the back of the Atomic
Alarm Clock to begin to charge. Charging times will vary.
Note:
Check that your device will charge with the USB
cord it came with. Many USB cords are for data transfer
only, and cannot be used for charging.
Output
: 1A maximum current USB.
Do NOT overload USB port.
IMPORTANT:
When operating on a/c power, to avoid interference, the backlight
and USB charge port will turn off while the Atomic Alarm Clock searches for the
WWVB signal. The backlight and USB charge port resume after a 2-10 minute
search which occurs during the late night or early morning hours.
MIN/MAX TEMPERATURE/HUMIDITY DATA:
The Atomic Alarm Clock shows daily
minimum and maximum temperatures each day starting at midnight (12:00 AM).
The clock automatically resets the min/max temperatures at midnight (12:00 AM).
View MAX data:
Press and release the MIN/MAX button once to view maximum
temperature and humidity values for indoor and outdoor data.
View MIN data:
Press and release the MIN/MAX button twice to view minimum
temperature and humidity values for indoor or outdoor data.
Reset MIN/MAX data
: Hold the MIN/MAX button for 5 seconds to reset all
min/max values.
HEAT INDEX:
Heat Index combines the effects of heat and humidity. It is the
apparent temperature of how hot it feels to a human being.
Note:
Heat index will be the same number as the
outdoor temperature until that temperature is above
80 degrees ° F (26.7° C).
View Heat Index:
From a normal display press the HEAT/DEW button once and
Heat Index will show instead of the ambient temperature.
DEW POINT:
Dew point is the saturation point of the air, or the temperature to
which the air has to be cooled in order to create
condensation.
Note:
Dew Point generally is lower than the
temperature.
View Dew Point:
From a normal display press the HEAT/DEW button twice and
Dew Point will show instead of the ambient temperature.
LOW BATTERY:
When this icon appears in the indoor (IN) reading section, replace the batteries
in the Atomic Alarm Clock .
When this icon appears in the outdoor (OUT) readings section, replace the
batteries in the outdoor transmitter.
WEATHER FORECAST ICONS:
The Atomic Alarm Clock predicts weather condition of the next 12-hours based on
the change of atmospheric pressure with 70-75% accuracy.
Note
: As weather conditions cannot be 100% correctly forecasted we are not
responsible for any loss caused by an incorrect forecast.
THIS STATION LEARNS!
Please allow 3-4 weeks for barometer calibration to generate an accurate
forecast.
IMPORTANT
: As the atomic alarm clock builds memory, it will compare the current
average pressure to the past forty day average pressure for increased accuracy.
The longer the atomic alarm clock operates in one location the more accurate the
forecast icons will be.
CARE AND MAINTENANCE:
Do Not Mix Old and New Batteries
Do Not Mix Alkaline, Standard, Lithium or Rechargeable Batteries
Do not expose the Atomic Alarm Clock to extreme temperatures, vibration or
shock.
Keep Atomic Alarm Clock dry.
Clean Atomic Alarm Clock with a soft damp cloth. Do not use solvents or
scouring agents.
The Atomic Alarm Clock is not a toy. Keep it out of reach of children.
The Atomic Alarm Clock is not to be used for medical purpose or for public
information, but is determined for home use only.
The specifications of this Atomic Alarm Clock may change without prior notice.
Improper use or unauthorized opening of housing will void the warranty.
If the unit does not work properly, change the batteries and/or check the a/c cord
connection.
SPECIFICATIONS:
Indoor
:
Temperature Range:
+32° F to +122° F (0° C to + 50° C)
Humidity Range:
1%-99% (RH)
Interval:
Every 30 seconds
Outdoor
:
Temperature Range:
-40°F to 140°F (-40°C to 60°C)
Temperatures below - 20°F (-28.8°C) require Lithium
batteries in the outdoor transmitter.
Humidity Range:
1%-99% (RH)
Distance:
Over 200 ft. (60 meters) RF 433MHz (open air)
Interval:
Every 50 seconds
Adapter:
Atomic Alarm Clock:
5-volt a/c power adapter (included)
Optional 3-AA, IEC, LR6 batteries (not included)
TX14TH Transmitter:
2-AA, IEC, LR6 batteries (included).
Battery Life:
TX14TH Battery Life:
Battery life is over 24 months when using reputable
battery brands for both Alkaline and Lithium batteries
Atomic Alarm Clock
Battery Backup:
Battery life is over 24 months when using the AC
adapter for primary power
Dimensions:
Atomic Alarm Clock:
5.9” L x 2.36” W x 5.9” H (150 x 60 x 150mm)
TX14TH Transmitter: 2.4” L x 1.3” W x 3.78” H (64 x 36 x 101mm)
WARRANTY INFORMATION
La Crosse Technology, Ltd provides a 1-year limited warranty on this product against
manufacturing defects in materials and workmanship.
This limited warranty begins on the original date of purchase, is valid only on products
purchased and used in North America and only to the original purchaser of this product. To
receive warranty service, the purchaser must contact La Crosse Technology, Ltd for
problem determination and service procedures. Warranty service can only be performed by
a La Crosse Technology, Ltd authorized service center. The original dated bill of sale must
be presented upon request as proof of purchase to La Crosse Technology, Ltd or La
Crosse Technology, Ltd’s authorized service center.
La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge
as stipulated herein, with new or reconditioned parts or products if found to be defective
during the limited warranty period specified above. All replaced parts and products become
the property of La Crosse Technology, Ltd and must be returned to La Crosse Technology,
Ltd. Replacement parts and products assume the remaining original warranty, or ninety
(90) days, whichever is longer. La Crosse Technology, Ltd will pay all expenses for labor
and materials for all repairs covered by this warranty. If necessary repairs are not covered
by this warranty, or if a product is examined which is not in need or repair, you will be
charged for the repairs or examination. The owner must pay any shipping charges incurred
in getting the La Crosse Technology, Ltd product to a La Crosse Technology, Ltd
authorized service center. La Crosse Technology, Ltd will pay ground return shipping
charges to the owner of the product to a USA address only.
The La Crosse Technology, Ltd warranty covers all defects in material and workmanship
with the following specified exceptions: (1) damage caused by accident, unreasonable use
or neglect (including the lack of reasonable and necessary maintenance); (2) damage
occurring during shipment (claims must be presented to the carrier); (3) damage to, or
deterioration of, any accessory or decorative surface; (4) damage resulting from failure to
follow instructions contained in the owner’s manual; (5) damage resulting from the
performance of repairs or alterations by someone other than an authorized La Crosse
Technology, Ltd authorized service center; (6) units used for other than home use (7)
applications and uses that this product was not intended or (8) the products inability to
receive a signal due to any source of interference.. This warranty covers only actual
defects within the product itself, and does not cover the cost of installation or removal from
a fixed installation, normal set-up or adjustments, claims based on misrepresentation by the
seller or performance variations resulting from installation-related circumstances.
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL,
CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH
THE OPERATION OR MALFUNCTION OF THIS PRODUCT. THIS PRODUCT IS NOT TO
BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. THIS
PRODUCT IS NOT A TOY. KEEP OUT OF CHILDREN’S REACH.
This warranty gives you specific legal rights. You may also have other rights specific to the
State. Some States do not allow the exclusion of consequential or incidental damages
therefore the above exclusion of limitation may not apply to you.
For warranty work, technical support, or information contact:
La Crosse Technology, Ltd
2817 Losey Blvd. S.
La Crosse, WI 54601
The complete instruction manual is available at:
www.lacrossetechnology.com/C86371
Protected under U.S. Patents:
5,978,738
6,076,044
6,597,990
Contact Support: 1-608-782-1610
Product Registration:
www.lacrossetechnology.com/support/register
FCC DISCALIMER
This Device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) the device must
accept any interference received, including interference that may cause undesired
operation.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER AUTHORITY TO
OPERATE THE EQUIPMENT
All rights reserved. This handbook must not be reproduced in any form, even in excerpts,
or duplicated or processed using electronic, mechanical or chemical procedures without
written permission of the publisher.
This handbook may contain mistakes and printing errors. The information in this handbook
is regularly checked and corrections made in the next issue. We accept no liability for
technical mistakes or printing errors, or their consequences.
All trademarks and patents are acknowledged.
