28
TIME RECEPTION ON/OFF SETTING
In areas where reception of the DCF time is not possible, the radio controlled clock (RCC) function can
be turned OFF. The clock will then work as a normal Quartz clock. (Default setting is ON).
1.
The digit “ON” will start flashing on the LCD.
2.
Use the + key to turn OFF the time reception function.
3.
Press the SET key to enter “Daylight Saving Time On/Off setting,” or exit the setting mode by
pressing ALARM key or SUN key.
Note:
If the time reception function is turned OFF manually, the clock will not attempt any reception of
the DCF time as long as the time reception OFF function is activated.
The time reception icon “ “ will not be displayed on the LCD.
DAYLIGHT SAVING TIME ON/OFF SETTING
The daylight saving time (DST) function can be set ON/OFF. Default setting is “ON”:
1.
“ON” will flash on the LCD with "dSt" displayed.
2.
Use the + key to turn the daylight saving time function ON or OFF.
3.
Press the SET key to enter “Manual Time setting” or exit the setting mode by pressing the
ALARM key or SUN key.
MANUAL TIME SETTING
In case the weather station cannot detect the DCF-signal (for example due to disturbances, transmitting
distance, etc.), the time can be manually set. The clock will then work as a normal quartz clock.
To set the clock:
1.
The hour digit will start flashing.
2.
Use the + key to increase or MIN/MAX key to decrease the value. Keep holding the key allows the
value to advance faster.
3.
Press the SET key to enter minute setting.
Flashing
Flashing
Minutes
Hour (flashing)
