10
2012/3/8Ver1.4+Ver1.1
2-3.
When there is more than 25 RPM or user press any key on console, the console will
be lit and return to Start/Ready status.
III. Key Functions
1.
QUICK START
：
When you press QUICK START key, the Electronic Watch will run in
MANNUL MODE and accumulate each functional value in positive number.
2.
STOP
：
When the electronic watch is running, press STOP key to pause the calculating
functions of the program. Pressing STOP KEY for two times can stop the working of
program.
3.
LEVEL
▲
：
This key is used to choose the PEOFILE function and when the product is
working, it is used to increase the resistance.
4.
LEVEL
▼
：
This key is used to choose the PEOFILE function and when the product is
working, it is used to decrease the resistance.
5.
FAN ON/OFF
：
The power switch of the fan Press FAN ON/OFF once and the fan will
start working at a low speed. When it is pressed again, the fan will stop working.
6.
LOW
：
Press LOW and the fan will work at a low speed.
7.
HIGHT
：
Press HIGHT and the fan will work at a high speed.
8.
ON/OFF
：
The power switch of the horn sound.
9.
ENTER
：
Press this key to set data and make it as confirming revised settings or revising
confirmed value.
10.
CLEAR
：
Clear the previous parameters.
11.
0~9 NUMBER KEYS
：
There are 10 keys in all. The parameter of program can be input,
such as age, weight, exercising time and so on. And during the performance of program,
adjust the level of resistance by number keys.
12.
PROGRAM KEYS
：
There are
6 KEYs in all, including P1
、
P2
、
TEST
、
WATT
、
HRC
and GOAL mode.
VI. Program Control Function
1.
Normal Mode
1-1.
When you select Manual mode, the Dot Matrix will display
『
---
』
and scrolling text
shows
『
SELECT PROGRAM OR QUICK START
』
. Press Quick Start key and all
values will start counting. Preliminarily set the resistance as Level 1, and change
lines for one time every one minute. When the PRM is lower, Dot Matrix will show
『
RPM
↑
』
,and console will enter PAUSE mode if RPM keeps lower for 5 seconds.
1-2.
During program, the scrolling text will display:
1-2-1.
Metric system
『
KMH
』
：
It will display
『
LEVEL
』
、
『
RPM
』
、
『
DIST
』
and
