19
2012/3/8Ver1.4+Ver1.1
display
『
RPM
↓
』
.
6-8.3.
During exercise, when LEVEL has reached 20 and WATT cannot achieve the
target value, Dot Matrix will display
『
RPM
↑
』
.
6-8.4.
After starting program, the console will judge the value of WATT once every
10 seconds.
During the exercise, the program will compare the actual value of WATT
with the target value of WATT. The following is the way to judge the value
of WATT:
If target WATT value:
『
actual WATT
≦
target WATT 75
』，
during exercise, he
LEVEL will automatically increase by 3 with maximum LEVEL 20.
If target WATT value:
『
actual WATT
≦
target WATT 50
』
，
the LEVEL during exercise
will automatically increase by 2 with maximum LEVEL 20.
If target WATT value:
『
actual WATT
≦
target WATT 15
』
，
the LEVEL during exercise
will automatically increase by 1 with maximum LEVEL 20.
If target WATT value:
『
actual WATT target WATT 15
≧
』
，
the LEVEL during exercise
will automatically decrease by 1 with minimum LEVEL 1.
If target WATT value:
『
actual WATT target WATT 50
≧
』
，
the LEVEL during exercise
will automatically decrease by 2 with minimum LEVEL 1.
If target WATT value:
『
actual WATT target WATT 75
≧
』，
the LEVEL during
exercise will automatically decrease by 3 with minimum LEVEL 1.
7.
GOAL Mode
：
Counting Down Mode
7-1.
Under Start/Ready status, press
GOAL to enter MANUAL mode. The scrolling text
will display
『
1.TIME 2.DISTANCE 3.CALORICES.
7-2.
Use number keys (1~3 key) to set the value of age, press ENTER to confirm
7-3.
Procedure of age-setting: At this time the Dot Matrix will be blinking and display the
preset value “30”, the scrolling text will display
『
ENTER AGE<10-99>
』
. You can insert
the value of your age by the number keys 0~9. When the value you insert is less than 10,
the Dot Matrix will be blinking to display the age 10. When the value you insert is more
than 99, the Dot Matrix will be blinking to display the value of age 99. The range of age
is 10~99. After setting the value of age, press ENTER to store it and continue to set the
value of weight.
7-4.
Setting of weight: The scrolling text will display
『
ENTER WEIGHT <30-199>KG
』
(or
display
『
ENTER WEIGHT <70- 440>LBS
』
). You can set the value of weight by the
number keys 0~9. The Dot matrix will be blinking and display the preset value 30,
meanwhile the value you insert will be blinking. You need to set 2~3 numbers while
making changes by the number keys (Range:30 ~ 199). After setting values, press
ENTER to store the values and continue setting.
7-5.
There is three different GOALs.
