22
2012/3/8Ver1.4+Ver1.1
You can press “ENTER” to enter the service mode.
2-2.
To test the signal of PRM: The LED of computer will display
『
TESTING RPM 0
』
. To
test the value of RPM to be detected by machine itself.
2-3.
To test the signal of LEVEL: The LED of computer will display
『
TESTING LEVEL
0
』
. You can press LEVEL
▲
or LEVEL
▼
to choose the level from 0 to 20. When the
level is set at 0, the resistance will be of mechanical wearing.
2-4.
To test the signal of KEY: The LED of computer will display
『
TESTING KEY 1A
』
.
Test whether the signal of each key is normal or not.
2-5.
To test the signal of HRC: The LED of computer will display
『
TESTING HR ***
』
.
Test whether the signal of the chest band is normal or not.
2-6.
To test the LED lights in all windows: At this time, the image is displayed like going
around the playground.
