background image

 

 

Safety Instructions 

 

 
This exerciser has been designed for home use only. Professional use, commercial or

 

use 

in  gym  centers,  will  automatically  cancel  the  manufacturers’  and/or  importers’  product 
liability.

 

 

Before you start training on your exerciser, please read the instructions carefully.   

Be sure to keep the instructions for information, in case of repair and for spare part delivery. 
 

  This exerciser is made for home use only and tested up to a max. Body weight of 100 kg. 

  Follow the steps of the assembly instructions carefully. 

  Use only original parts as delivered. 

  Before the assembly, be sure to check if delivery is complete by using the included parts-list. 

  For assembly use only suitable tools and asks for assistance with assembly if necessary. 

  Place the exerciser on an even, non-slippery surface. Because of possible corrosion, the usage of any 

exerciser in moist areas is not recommended. 

  Check before the first training and every 1-2 months that all connecting elements are tight fitting and 

are in the correct condition. 

Replace  defective  components  immediately  and/or  keep  the  equipment  out  of  use  until  repair.    For 
repairs, use only original spare parts. 

  In case of repair please ask your dealer for advice 

  Avoid the use of aggressive detergents when cleaning. 

  Ensure that training starts only after correct assembly and inspection. 

  For all adjustable parts be aware of the maximum positions to which they can be adjusted/tightened to. 

  This  exerciser  is  designed  for  adults.  Please  ensure  that  children  use  the  exerciser  only  under  the 

supervision of an adult. 

  Ensure that those present are aware of possible hazards, e. g. movable parts during training. 

Warning: incorrect/excessive training can cause health injuries. 

  Please follow the advice for correct training as detailed in training instructions. 

Consult  your  physician  before  starting  with  any  exercise  program.  He  can  advise  on  the  kind  of 
training and which impact is suitable. 

 

The owner’s manual is only for customers’ reference. 

  The  supplier  can  not  guarantee  for  mistakes  occurring  due  to  translation  or  change  in  technical 

specification of the product. 

All data displayed are approximate guidance and cannot be used in any medical application 

Summary of Contents for GK878H













Reviews: