1: Frame
2: Base frame
3: Support post (Left)
4: Support post (Right)
5: Screws
6: Nuts
7A: Power plug
7B: Power wire
8: Handlebar
9: Console
10: Screws
11: Bottle holder
12: Safety key
13: Support post housing
(Upper left)
14: Support post housing
(Lower left)
15: Screws
16: Support post housing
(Upper right)
17: Support post housing
(Lower right)
18: Screws
19: Washers
20: Screws
Optional parts:
21: Book holder
22: Book holder bracket (2pcs)
23: Screws M5 X 10L (4pcs)
24: Screws M4 X 8L (4pcs)
LOHAS T1
ASSEMBLY INSTRUCTION
Parts
Hardware
Screws already in place on the treadmill:
Screws in the plastic bag:
Tools:
WARNING
After unpacking the fitness equipment, examine it carefully for possible damage. If there is any damage or there are missing parts, please contact
your retailer or an authorized repair facility for assistance.
1. Since your treadmill is a heavy piece of equipment, we recommend the after taking off the top portion of the box; you slit the corners of the
lower carton and fold down the sides. This will eliminate the need to pick up the treadmill over the sides of the box.
2. Prior to starting the assembly process take all the parts out of the box, remove all plastic bags, and then lay them out on the floor to become
familiar with the components. Make sure that you remove all parts packaged underneath the treadmill. You may need to slightly pick up the
back of the treadmill to get better access to the parts on the bottom. You will notice that the treadmill is completely assembled except for the
handle bars and the display window.
5
2
1
8
7A
17
15
5
6
14
6
15
12
11
4
3
18
13
9
18
16
10
10
7B
5: Screw
M10 X 60L (2pcs)
10: Screw
M8 X 70L (4pcs)
Wrench-6mm
Wrench-5mm
Wrench
Screwdriver
6: Nylon nut
M10 X 10t (2pcs)
15: Screw
#8 X 5/8”L (2pcs)
18: Screw
#8 X 3/4”L (2pcs)
20: Screw
M8 X 15L (4pcs)
19: Washer
M8 (4pcs)
21
24
22
23
2
