39E Operating instructions
Page
5 / 8
──────────────────────────────────────────────────────────────
SW V1.01
11.09.2005
La Gard Latin America - 741 Shotgun Rd. – Sunrise Florida – 33351 – USA
Tel. +1 954 476 5574 – Fax. + 7 954 476 5576 – Email: info@lagardlat.com
General procedures
To enter manager or user code
Enter code. Double beep if valid, triple beep if wrong code.
To enter special function (manager or user)
Enter code, holding down last digit. Double beep. Keep holding down last digit until double beep. Enter special
function number (0 - 9). Double beep if valid, triple beep if not.
Open procedures
To open (Standard mode)
Enter code.
If time delay enabled wait open window. Enter code again.
Solenoid / motor is activated.
To open (Time Delay override mode)
Enter user #9 code. Solenoid / motor is activated.
Note
:
•
If dual code mode enabled, enter first manager or user code, then override code.
To open (Dual code mode)
Enter first code.
Enter second code.
If time delay enabled, first code will start time delay. During open window, enter both codes to activate solenoid /
motor.
Solenoid / motor is activated.
