La Gard AuditGard, Setup Instructions

(P/N) 742.049 Rev A 06/10 • © copyright 2010 

Kaba Mas LLC

page 8 of 13

Install Users: 

To install a User, place a check mark in the 

Installed

 box next to the User ID you wish to install, or you can click the 

Select All

 button 

(Figure 10). If a User box is unchecked, the User is unavailable and cannot be enabled by the Manager later. 

Figure 10

Master Combination:

The Master default combination is 5-5-5-5-5-5-5-5, and the combination is always eight digits.
The Master can audit the Lock, initiate Lock Reset, and 

if selected

 Enable/Disable/Disable the Manager

 (Figure 11). The Master 

CANNOT

 open the Lock. Refer to Master Instructions 788.0310.

NOTE: 

If the default combination is change using the software, the Master combination must still be changed at the keypad before any 

Master commands are available.

Figure 11

Manager Combination:

The Manager default combination is 1-2-3-4-5-6 (Figure 12).
The Manager can open the Lock, audit the Lock, Enable/Disable/Disable the Users, change time settings, and confirm Lock Reset. 

NOTE: 

If the default combination is change using the software, the Manager combination must still be changed at the keypad before 

any Manager commands are available.

Figure 12