(P/N) 731.018 Rev H 12/14 • © copyright 2008-2014
Kaba Mas LLC
page 3 of 11
The Setup Main Menu screen will be displayed (Figure 1).
Figure 1.
Select the COM Port
When the Setup program is started, it identifies the COM Ports that are currently available on your PC. You must select the COM Port
to be used when communicating with the lock each time you start the program.
1. Access the Device Manager to determine which COM Port to select for the Setup Software by completing the following steps:
a. Right click on
My Computer.
b.
Select
Manage.
The Computer Management window is displayed.
c. Under System Tools, select the
Device Manager.
d. From the Device Manager list, select
Ports (COM & LPT).
The list of communication and printer ports currently identified in the PC system will be displayed.
e. Plug the USB or Serial Interface Adapter into an available USB port on the PC.
If using a USB Adapter, the list of ports will be updated to reflect the new device. The LA GARD USB Interface Adapter can
be identified in the list as
USB Serial Adapter. The virtual COM Port assigned to the USB port where the Adapter is currently
installed will follow the device description (Figure 2).
Figure 2.
