© copyright 2008
(P/N)702.087 v1 • 8/08
Kaba Mas LLC
page 8 of 11
2.8.2 MASTER MEnU - Users - Delete A User
1. Press any key to power up SMARTPOINT.
• Display will show either “ENTER CODE” or “SELECT LOCK” when two or more locks are installed.
2. Hold down “zero” until the display shows “MASTER CODE, X-X-X-X-X-X-X-X”.
3. Enter master code.
• If a valid code is entered the display will show “TIME/DATE”
4. Press P six (6) times to select the User Menu, the display will show “USERS ON/OFF? “.
5. Press OK to view the User status, the display will show “USERS ON/OFF, (XX - XX)”
6. Press User ID (XX) to select a user, display will show “USER ID = X, DISABLE?”
7. Press P, display will show “USER ID = X, DELETE?”
8. Press OK, display will show “USERS ON/OFF, (XX - XX)”
2.8.3 MASTER MEnU - Users - Disable A User
1. Press any key to power up SMARTPOINT.
• Display will show either “ENTER CODE” or “SELECT LOCK” when two or more locks are installed.
2. Hold down “zero” until the display shows “MASTER CODE, X-X-X-X-X-X-X-X”.
3. Enter master code.
• If a valid code is entered the display will show “TIME/DATE”
4. Press P six (6) times to select the User Menu, the display will show “USERS ON/OFF? “.
5. Press OK to view the User status, the display will show “USERS ON/OFF, (XX - XX)”
6. Press User ID (XX) to select a user, display will show “USER ID = X, DISABLE?”
7. Press OK, display will show “USERS ON/OFF, (XX - XX)”
2.8.4 MASTER MEnU - Users - Enable A User
1. Press any key to power up SMARTPOINT.
• Display will show either “ENTER CODE” or “SELECT LOCK” when two or more locks are installed.
2. Hold down “zero” until the display shows “MASTER CODE, X-X-X-X-X-X-X-X”.
3. Enter master code.
• If a valid code is entered the display will show “TIME/DATE”
4. Press P six (6) times to select the User Menu, the display will show “USERS ON/OFF? “.
5. Press OK to view the User status, the display will show “USERS ON/OFF, (XX - XX)”
6. Press User ID (XX) to select a user, display will show “USER ID = X, ENABLE?”
7. Press OK, display will show “USERS ON/OFF, (XX - XX)”
MASTER CODE
XXXXXXXX
MASTER CODE
XXXXXXXX
MASTER CODE
XXXXXXXX
TIME/DATE
TIME/DATE
TIME/DATE
USERS ON/OFF
USERS ON/OFF
USERS ON/OFF
USERS ON/OFF
(XX - XX)
USERS ON/OFF
(XX - XX)
USERS ON/OFF
(XX - XX)
USER ID = 2
DISABLE?
USER ID = #
DISABLE?
USER ID = #
DISABLE?
USER ID = 2
DELETE?
USERS ON/OFF
(XX - XX)
USERS ON/OFF
(XX - XX)
