Assembly Instructions
4
IMPORTANT - Remove any packaging before use, but retain the safety instructions and store them with this
product.
ASSEMBLY
STEP 1 -
Connect middle section (5) to the base section (6) using 3x bolt (A) secure with 3x nut
(B). Now locate firebowl (4) to bolts (A) and secure using 3x washers (D) and 3x wing nuts (C).
STEP 2 -
Place log grate (3) into the firebowl (4).
STEP 3 -
Secure the ring handle (1) to the mesh cover (2), using the pre-attached nut.
STEP 4 -
Place mesh cover (2) onto the firebowl (4), using the tool (7).
Your product is now ready to use, but please ensure you have read these instructions thoroughly prior
to use.