background image

WARNINGS - CAUTION!
  DO NOT use indoors!
  NEVER leave a burning fire unattended.
  DANGER of carbon monoxide poisoning - NEVER light this product or let it smoulder or cool down in 
 

confined spaces.

•  DO NOT overload the unit with fuel.
•  FIRE HAZARD – Hot embers may emit while in use.
•  WARNING! DO NOT use spirit or petrol for lighting or re-lighting! Use only firelighters complying to  
 EN1860-3
•  This product is ONLY suitable for use with charcoal, untreated wood, logs or La Hacienda HeatBlox.
•  DO NOT use this product on decking or any other flammable surfaces such as dry grass, wood 
 

chips, leaves or decorative bark.

•  Ensure that the product is positioned at least 2 meters away from flammable items.
•  DO NOT use this product as a furnace.
•  ALWAYS USE safety tool provided and heat resistant gloves when in use as the unit will be hot.
•  WARNING! This firepit will become very hot, do not move it during operation.
•  WARNING! Keep children and pets away.

CARE & USE
  Ensure that the product is positioned on a permanent flat, level, heat resistant non-flammable surface away 
 

from flammable items.

  Ensure product has a minimum of 2m overhead clearance and has a minimum of 2m clearance from other 
 

surrounding items.

  Decide on the location as above.
  The unit may be left outside all year if a La Hacienda Cover is used to help protect it from bad weather.
  As this model is made from steel, the surface will age and develop surface rust as soon as it is 
 

exposed to the natural weather elements and also from first use. This is to be expected; this does not affect 

 

use and is not a product fault. Please see below instructions on how to refresh the paint finish if desired.

  To help reduce surface rust, rub the product with an oily rag after each use.
  For safety reasons, always inspect your product prior to use for signs of fatigue and damage and replace 
 

your model as and when necessary.

  Always use heat resistant gloves during use and when adding fuel.

HOW TO USE AS A FIREPIT
  This product is only suitable for use with charcoal, untreated wood, logs or La Hacienda HeatBlox.
  Do not overload with fuel, only one or two logs is sufficient.
  Prepare a stack of loosely crumpled newspaper and place on top of log bars. 
  Pile finely split dry firewood on top of paper. 
  Carefully light the newspaper and place the mesh cover (1) on bowl using hand tool (8). 
  Use the hand tool (8) to lift the mesh cover (1) when adding more fuel.
  Always use heat resistant gloves when adding fuel. 

2

Care and safe use guidelines

Summary of Contents for Moresque

Page 1: ... co uk IMPORTANT Carefully remove any packaging before use but retain the safety instructions These instructions form part of the product Please take note of all of the safety warnings listed in these instructions Please read these instructions in their entirety and retain them for future reference These instructions should be stored with the product This product is for domestic use ONLY and shoul...

Page 2: ...a minimum of 2m clearance from other surrounding items Decide on the location as above The unit may be left outside all year if a La Hacienda Cover is used to help protect it from bad weather As this model is made from steel the surface will age and develop surface rust as soon as it is exposed to the natural weather elements and also from first use This is to be expected this does not affect use ...

Page 3: ...ll surfaces and tools are clean and free of old food residues DO NOT use the same utensils to handle cooked and uncooked foods Ensure all meat is cooked thoroughly before eating CAUTION eating raw or under cooked meat can cause food poisoning e g bacteria strains such as E coli To reduce the risk of under cooked meat cut open to ensure it is cooked all the way through CAUTION if meat has been cook...

Page 4: ... on the inside of the bowl STEP 3 Fix the lower part of each leg 3 to the base of the bowl 2 using 1x bolt A and 1x nut B STEP 4 Attach lid handle 5 to the mesh lid 1 using 1 x nut B STEP 5 Place cooking grill 4 onto the support bars 7 ensuring the grill pegs are located behind the support bars preventing the grill from sliding Place mesh lid 1 onto support bars Prior to Assembly Read the instruct...

Reviews: