Parts List
Prior to assembly, read the instructions carefully. Check all parts against this parts list. Carry out assembly on a soft
surface to avoid scratching the paint. Please retain this information for future reference.
Assembly Diagrams
Figure 1
Figure 3
Figure 2
Figure 4
Assembly Instructions
IMPORTANT! - Remove any packaging before use, but retain the safety instructions and store them with this product.
This product must only be used under an umbrella/parasol or using the heatmaster u3cm ceiling mount in a gazebo or
other covered location.
STEP 1 - Ensure parasol is secure and stable by using a suitable parasol base.
STEP 2 - Place unit on the parasol pole (Figure 1).
STEP 3 - Slide unit up the parasol pole to the desired height (no less than 1.8m) and tighten largehorizontal clamping
thumbscrew (Figure 2).
STEP 4 - Bring mains lead through hole in table, wind around parasol pole and connect into base of unit (Figure 3).
STEP 5 - Connect plug on mains lead into an RCD protected outdoor weatherproof socket (Figure 4).
The product is now ready to use but please ensure you have read these instructions thoroughly prior to use.
1 (1x)
