25
Main
Menu
Second-
Level
Menu
Third-
Level
Menu
Fourth-
Level
Menu
Default
Value
Setting
Value
No
.
Rated
Capacity
150 Ah
Capacity of
one battery
string
Other
Parameters
Installation
Time
2010-01-01
Set to the
current date
Table 13 – Setting battery parameters
5.5
(Optional) Setting the Hibernation Parameter
CAUTION:
Before hibernating rectifiers, ensure that the upper-level circuit breaker can endure a current greater
than the maximum input of the power system.
Set Hibernation enable to Enable if you need to use the intelligent hibernation function of the rectifiers.
Main Menu
Second-Level
Menu
Third-Level
Menu
Default Value Setting Value
Parameters
Settings
Energy Saving
Hibernation
enable
Disable Enable
Table 14 – Setting the hibernation parameter
5.6
Setting Communication Parameters
5.6.1 Installing AC Input Power Cable
Procedure
Step 1
Apply to the site or equipment room network administrator for a fixed IP address.
Step 2
Set the IP address, subnet mask, and gateway on the LCD, as shown in Table 15.
Main Menu
Second-Level
Menu
Third-Level
Menu
Default Value Setting Value
Setting Wizard
Network
Parameters
IP Address
192.168.0.10
Set this
parameter based
on the address
assigned by the
network
administrator.
Subnet Mask
255.255.255.0
Set this
parameter based
on the address
assigned by the
