background image

INSTRUCTION/OPERATING AND TROUBLESHOOTING MANUAL FOR MODEL EC 

Page 10 of 11 

 

MANUFACTURER’S WARRANTY 

 

 

All  La  Marche  Manufacturing  Co.  equipment  has  been  thoroughly  tested  and  found  to  be  in  proper  operating  condition  upon 
shipment from the factory and is warranted to be free from any defect in workmanship and material that may develop within one 
year  from  date  of  purchase.    In  addition  to  the  standard  one  (1)  year  warranty,  La  Marche  warrants  it’s  magnetics  and  power 
diodes on a parts replacement basis only for one (1) additional year under normal use. 
 
Any part or parts of the equipment (except fuses, DC connectors and other wear-related items) that prove defective within a one 
(1) year period shall be replaced without charge providing such defect, in our opinion, is due to faulty material or workmanship and 
not  caused  by  tampering,  abuse,  misapplication  or  improper  installation.    Magnetics  and  power  diodes  are  warranted  for  two  (2) 
years  after  date  of  purchase.    During  the  last  one  (1)  year  of  this  two  (2)  year  warranty  period,  the  warranty  covers  parts 
replacement only, and no labor or other services are provided by La Marche, nor is La Marche obligated to reimburse the owner or 
any other person for work performed.  
 
Should a piece of equipment require major component replacement or repair during the first year of the warranty period, these can 
be handled in one of two ways: 
 

1.  The  equipment  can  be  returned  to  the  La  Marche  factory  to  have  the  inspections,  parts  replacements  and 

testing performed by factory personnel.  Should it be necessary to return a piece of equipment or parts to the 
factory, the customer or sales representative must obtain authorization from the factory.  If upon inspection at 
the factory, the defect was due to faulty material or workmanship, all repairs will be made at no cost to the 
customer during the first year.  Transportation charges or duties shall be borne by purchaser. 

 
2. If the purchaser elects not to return the equipment to the factory and wishes a factory service representative 

to make adjustments and/or repairs at the equipment location, La Marche's field service labor rates will apply.  
A purchase order to cover the labor and transportation cost is required prior to the deployment of the service 
representative. 

 

In accepting delivery of the equipment, the purchaser assumes full responsibility for proper installation, installation adjustments and 
service  arrangements.    Should  minor  adjustments  be  required,  the  local  La  Marche  sales  representative  should  be  contacted  to 
provide this service only. 
 
All  sales  are  final.    Only  standard  LaMarche  units will  be  considered  for  return.    A  25% restocking  fee  is  charged  when  return  is 
factory authorized.  Special units are not returnable. 
 
In no event shall La Marche Manufacturing Co. have any liability for consequential damages, or loss, damage or expense directly or 
indirectly arising from the use of the products, or any inability to use them either separately or in combination with other equipment 
or  materials,  or  from  any  other  cause.    In  addition,  any  alterations  of  equipment  made  by  anyone  other  than  La  Marche 
Manufacturing Co. renders this warranty null and void. 
 
La Marche Manufacturing Co. reserves the right to make revisions in current production of equipment, and assumes no obligation to 
incorporate these revisions in earlier models. 
 
The  failure  of  La  Marche  Manufacturing  Co.  to  object  to  provisions  contained  in  customers'  purchase  orders  or  other 
communications shall not be deemed a waiver of the terms or conditions hereof, nor acceptance of such provisions. 
 
The  above  warranty  is  exclusive,  supersedes  and  is  in  lieu  of  all  other  warranties,  expressed  or  implied,  including  any  implied 
warranty  of  merchantability  or  fitness.    No  person,  agent  or  dealer  is  authorized  to  give  any  warranties  on  behalf  of  the 
Manufacturer, nor to assume for the Manufacturer any other liability in connection with any of its products unless made in writing 
and signed by an official of the manufacturer. 

Summary of Contents for EC












Reviews: