background image

INSTRUCTION MANUAL FOR PC63 CAGE 

Page 10 of 10 

 

MANUFACTURER’S WARRANTY 

 
All  La  Marche  Manufacturing  Co.  equipment  has  been  thoroughly  tested  and  found  to  be  in  proper  operating  condition 
upon  shipment  from  the  factory  and  is  warranted  to  be  free  from  any  defect  in  workmanship  and  material  that  may 
develop within two (2) years from date of purchase under normal use. 

 

If the equipment proves defective within a two year period, it shall be replaced without charge after examination  at our 
factory,  providing  such  defect  in  our  opinion,  is  due  to  faulty  material  or  workmanship  and  not  caused  by  tampering, 
abuse, misapplication or improper installation.  

 

Should the equipment require major replacement or repair, the equipment must be returned to the La Marche factory to 
have the inspections, parts, replacements and testing performed by factory personnel.  Should it be necessary to return a 
piece  of  equipment  to  the  factory,  the  customer  or  Sales  representative  must  first  obtain  a  RMA  (Return  Material 
Authorization) from the factory.  If upon inspection at the factory, the defect was due to faulty material or workmanship, 
all repairs will be made at no cost to the customer during the warranty period.   

 

All internal maintenance to be performed by La Marche.  

Warranty is void if seal is damaged. 

 

La Marche reserves the right to honor the warranty with a replacement unit. 

 

In  accepting  delivery  of  the  equipment,  the  purchaser  assumes  full  responsibility  for  proper  installation,  installation 
adjustments and service arrangements.  Should minor adjustments be required, the local La Marche Sales Representative 
should be contacted to provide this service. 

 

All  sales  are  final.    Only  standard  LaMarche  units  will  be  considered  for  return.    A  25%  restocking  fee  is  charged  when 
return is factory authorized.  Special units are not returnable. 

 

In no event shall La Marche Manufacturing Co. have any liability for consequential damages, or loss, damage or expense 
directly or indirectly arising from the use of the products, or any inability to use them either separately or in combination 
with other equipment or materials, or from any other cause.  In addition, any alterations of equipment made by anyone 
other than La Marche Manufacturing Co. renders this warranty null and void. 

 

La  Marche  Manufacturing  Co.  reserves  the  right  to  make  revisions  in  current  production  of  equipment,  and  assumes  no 
obligation to incorporate these revisions in earlier models. 

 

The  failure  of  La  Marche  Manufacturing  Co.  to  object  to  provisions  contained  in  customers'  purchase  orders  or  other 
communications shall not be deemed a waiver of the terms or conditions hereof, nor acceptance of such provisions. 
 
The  above  warranty  is  exclusive,  supersedes  and  is  in  lieu  of  all  other  warranties,  expressed  or  implied,  including  any 
implied warranty of merchantability or fitness.  No person, agent or dealer is authorized to give any warranties on behalf of 
the  Manufacturer,  nor  to  assume  for  the  Manufacturer  any  other  liability  in  connection  with  any  of  its  products  unless 
made in writing and signed by an official of the manufacturer. 

 

Summary of Contents for PC63 Series











Reviews: