background image

3

ENGLISH

3) GENERAL DESCRIPTION

4) PACKAGING

On opening the packaging, check carefully to make sure the appliance is intact and
that there are no signs of damage. If in any doubt, do not use the unit and contact
personnel with the appropriate professional skills.
The packaging materials must be kept out of the reach of children as they repre-
sent a potential source of danger.
Keep the packaging until the warranty has expired.

5) DISPOSAL

Do not litter: dispose of the packaging materials according to the laws in force.
Should you decide not to use the appliance any more, remember to unplug it so
that it cannot be used, and then cut the cable in the point where it comes out of
the appliance.
Contact specialized firms for information on the disposal of the components of the
appliance.

SUPER JOLLY

MAJOR - KONY

ROBUR - ROYAL - STARK

HOPPER COVER

HOPPER (coffee bean container)

GRINDING ADJUSTMENT  DISK

HANDLE

LOCKING SLIDE

HOPPER SAFETY SCREW

HOPPER FIXING PIN

COFFEE GRINDING ADJUSTMENT

DISK

PUSH BUTTON PANEL

FUNNEL (DOSER)

FILTER HOLDER FORK

SERIAL NUMBER LABEL

SWITCH

DRIP TRAY

1

2

3

4

5a

5b

6

7

8

9

10

11

12

Summary of Contents for SUPER JOLLY













Reviews: