background image

6. Use

This   appliance   has   been   designed
SOLELY for grinding coffee beans. Any
other use is understood to be improper,
and consequently hazardous. The manu-
facturer cannot be held responsible for
any damage as a result of improper or
incorrect use. 

Do   not   use   the   appliance   for   grinding
other types of food, or anything else. 
Do   not   use   the   doser   (Vulcano   Auto-
matic) to store foods or measure them. 
THE   GRINDER-DOSERS   MANUFAC-
TURED   BY   OUR   COMPANY   ARE
INTENDED FOR SKILLED PERSONNEL

ONLY   FOR PROFESSIONAL  USE AND
NOT FOR HOUSEHOLD USE. The user
must be an adult. 
Do   not   allow   children   or   incapable
persons to use the appliance.

7. Installation and wiring

The   appliance   must   be   installed   by
skilled technical personnel in conformity
with the safety rules in force. Incorrect
installation   may   result   in   injury   of
persons or animals, or damage to prop-
erty, for which the manufacturer cannot
be held responsible.

The   appliance   must   be   placed   on   a
stable,   flat   surface   (we   recommend   to
install   the   appliance   at   an   height
between 80 and 100 cm from the floor).

Before plugging in the appliance, make
sure the voltage and frequency values
of the supply mains correspond to the
ratings indicated on the label featuring
the appliance’s technical data. 

The wall socket must be fitted with an
efficient   earth   contact.   Consequently,
it is essential to make sure the earth

system   is   efficient   and   in   conformity
with   current   safety   rules.   If   in   any
doubt,   have   the   system   thoroughly
checked by personnel with the appro-
priate professional skills. 
IT IS COMPULSORY TO EARTH THE
APPLIANCE. 
The   manufacturer   cannot   be   held
responsible in the event this regulation
is not complied with. 

It is essential to make sure the ratings of
the   system   are   suitable   for   the   power
absorbed by the appliance - as indicated
on the label featuring the technical data
- and that the wall socket is protected
against overcurrents. 

Do   not   use   extension   cables,   plug
adapters for multiple sockets or make-
shift connections. 

In EEC member countries, the regula-
tion in force calls for the external equi-
potential terminal     on the outer part
of   the   appliance’s   base   plate   to   be
connected   to   a   equipotential   node   if
the installation is to be correct. 

The motor must rotate clockwise. If the
rotation of three-phase motors is to be
inverted,   by   inverting   the   two   power
supply wires inside the plug, this must
be carried out by skilled personnel. 

The appliance is suitable for indoor use
only. Do not use the appliance outdoor.

Thoroughly clean the appliance at the
first installation; follow the instructions
in chapter 9 and 14.

Do   not   install   the   appliance   near   to
water dispenser or similar product that
could throw water jet on the appliance.

4

EN

Summary of Contents for vulcano















Reviews: