LA VENEZIA-17 ESPRESSO MACHINE USER MANUAL
6
Switching on
PREVIOUS CHECKS
Before switching on the machine, ensure the following:
The mains switch is on.
The water mains tap is open”.
TURNING ON THE MACHINE
Press the master switch (
1
); the red indicator light “connected machine” switches on. The led
illumination of the working zone of the machine will also switch on.
At the same time, the LCD display (
5
) will turn on and it will guide you through the initialization
process.
The display shows that the machine is on “OFF” mode. To start working with the machine, you
can turn it on by pressing the double-espresso button of the group 1 (
6
)
All the dose buttons will light and as the water level in the boiler is less than the minimum
required, the boiler will start filling up to the correct level.
Once the boiler is filled, the machine will start to heat the water in the boiler until the
programmed temperature is reached (120º by default). The display will show the default
message and the current temperature as it rises.
You can use this time to purge the hydraulic circuit of each group by pressing any of the
dose buttons.
You can also insert the filterholders on its placement aligning the flanges with the slots in the
group and rotate it anti-clockwise until the handle is perpendicular to the coffee machine.
